Manual activation can be achieved through the use of the optional eight switch Racepak switch panel (500-SW-PNL8), or 16-channel switch module (500-SW-SM16). From the Racepak SmartWire unit, a single small cable is routed to the Switch panel of choice, reducing wiring clutter. Users needing additional switch panel capabilities can easily expand through the use of a "jumper" cable to a second Racepak Switch Panel or Switch Module.

Features

125 Total Amp Capacity

Min/Max Power Supply: 8-20 Volts

Operating Power Supply: 12-16 volt automotive applications

30 Total Output Channels

Output Protection: User definable over current limits. Internal short circuit and/or thermal overload (non definable)

8 Channels @ 20 Amps Maximum for high amperage applications such as electric fuel pumps or starter solenoids.

22 Channels @ 10 Amps Maximum for low amperage applications such as head lights, turn signals, or small cooling fans.

12 Hardwired Switched Inputs - Voltage triggered >2.7V or Ground Triggered <2.5V

Data Output: Volts, Amps, Status (On/Off).

Test Mode: This software integrated feature allows you to quickly determine if an input or output is working as intended.

Response Time: 3.0 Miliseconds

Programming: USB Cable w/ Free Datalink II Software

Dimensions: 6" (L) x 5.5" (W) x 1.5" (H)

Connectors: Two - 23 pin Ampseal, One 1/4" x 20 Main Power Stud, One mini USB (for programming), One Switch CAN bus (for optional switch panel or module), One V-Net CAN bus for optional V-net accessories, such as sensors).

Includes - Drag Smartwire Harness - Switch Panel - Smartwire to Switch Panel cable, and Programming Cable.